Extra 15% Off Tiles!* - Use Code: DEC15

Adhesives & Grouts


Our Bestselling Adhesives & Grouts



Adhesives & Grouts Ideas from Walls and Floors

Once you’re selected the tiles you’d like to invite into your bathroom or kitchen, it’s time to pass them over to the tiling process, to fix them in place and add those finishing touches; to create the look that will last for years to come! There are two main elements in the tiling process; applying the tiles using a suitable tile adhesive, and finishing the display by filling the joints with tile grout. 

The right tile adhesive for the job 

Tile adhesive is an important part of the tiling process, as it secures the tiles in place, where they will stay for years to come. Different tile adhesives cover different settings and suitability. 

For an all-rounder wall tile adhesive, use our own-brand Kwik Grip Ice White Wall Tile Adhesive. It’s suitable for most types of wall tile, it’s water resistant (which is crucial if you’re tiling a bathroom or shower area) and it’s non slip, meaning your tiles won’t drop out of place over time. Best of all, though, it’s ready-mix, meaning it’s a ready-to-use liquid, rather than a powder than requirements mixing. 

For a versatile floor tile adhesive, use our cement-based Kwik Flex Floor Tile Adhesive. It’s suitable for ceramic, porcelain and natural stone tiles, and can be used to apply tiles to a variety of different surfaces. It’s also rapid setting, and can be used with underfloor heating. You can apply it straight onto the Thermonet matting (place the cable side down, so that the mesh protects them). 

Tile grout: The finishing touch 

The final part in the tiling process is the application of the tile grout. Once you’ve used tile adhesive to fix your wall or floor tiles in place, it’s time to fill the gaps between them using a suitable tile grout. Make sure the tile grout you’re using is suitable for your project. Mix up the powder with water so you have a nice consistency and, using a grout float, spread a nice even helping across the face of the tiles; working it into all the joints and crevices. Use the float to gather up any excess. If it can’t be worked into any joints, scrape it off into the bucket. Wait for it to partly dry, then wipe off any residue with a damp cloth (being careful not to pull grout out from the joints). 

You can use different colours of tile grout to add effect to your tiling project. For example, you can use a contrasting black tile grout to frame white metro tiles. This really helps to make them stand out. To avoid unsightly mould appearing in your tile joints, use an anti mould tile grout.