An unglazed, fully vitrified, rectangle tile that is frost resistant and has a very low porosity. Suitable for both interior and exterior use.
Colour: 25 Different Colours Available
Our colourful Victorian-style tiles are perfect for hallways, kitchens, bathrooms, decorative walls and splashbacks, conservatories and garden paths. With an almost limitless combination of shapes and colours to choose from, you can pick a traditional geometric pattern or create your own bespoke design.
Sizes & Colours These tiles are natural clay products and there may be small variations in both size and shading per box. Adjust grout lines to allow for dimensional differences. It is advisable to mix tiles of the same colour from different boxes to ensure that any colour variations are evenly distributed.
All tiles in the current victorian Spare ranges are 9 - 10mm thick.
All triangles, and squares 70mm and below, have completely square edges. Squares and octagons of 100mm and 150mm, and hexagons, have a rebated edge, which gives a flush finish once grouted.
Sealing of the Tiles The tiled floor should be completely dry prior to sealing in order not to trap moisture under the seal, as this can produce cloudy white patches. We recommend these popular clay floor tiles are sealed with HG Golvpolish Sealer
Fixing It is recommended to use a professional tile fitter to lay geometric floor tiles. Tiles should be laid on a flat sound base using a cementitious tile adhesive and grouted with a fine, cement based, grey grout. Ensure that exterior tiling is laid so that water cannot pool.
WE RECOMEND EXTERIOR TILES SHOULD NOT BE SEALED AS THIS CAN COMPROMISE THE FROST RESISTANCE