Shop All Sealing >

Key Features

> Helps protect against staining

> Strongly repels water, oil and grease

> Allows surfaces to breathe

> Suitable for use on floors that have no damp-proof course

> Maintain with LTP Waxwash for floors and LTP Stonewash for walls

> Larger 1Ltr bottle for bigger projects

Approximate coverage - 1 litre will cover 10sqm for a single coat, 2 coats 5 sqm and 3 coats 3 sqm.

Description

LTP Mattstone Tile Sealer

9 reviews 9 reviews

Size: 1 LtrID: 11256

3 pieces in Stock

£19.95

QTY

Weight1.50 KG

Product ID11256

Sale byPer Unit

SuitabilityFloors and Walls

Material TypeCleaning and Maintenance | Sealers and Protectors | Liquid

Size1 Ltr

Space UsageInternal/External

Document Technical Data Sheet

Coverage10 SQM approx

Product Details

Key Features

> Helps protect against staining

> Strongly repels water, oil and grease

> Allows surfaces to breathe

> Suitable for use on floors that have no damp-proof course

> Maintain with LTP Waxwash for floors and LTP Stonewash for walls

> Larger 1Ltr bottle for bigger projects

Approximate coverage - 1 litre will cover 10sqm for a single coat, 2 coats 5 sqm and 3 coats 3 sqm.

Description

Product Reviews

09/05/25Ian Bentley|Verified purchase

23/11/24Tim |Verified purchase

Really good stuff. Easy to apply and brings out the quality of slate tiles. Couldn’t believe the speediness of delivery. Would recommend the product and the supplier. Cheaper than anywhere elseelse even including delivery

18/04/24Gavin TurnerRichards|Verified purchase

14/07/23Kevin |Verified purchase

It does the job but it is not my preferred finish, I have since purchased another sealer with colour enhancement which is more effective on slate tiles. This is just my opinion. The company provided a very good service.

Reply17/07/23

Hey Kevin, Thanks for the review. We do sell; another sealant which enhances the colour. I have linked this below for you: https://www.wallsandfloors.co.uk/ltp-cleaning-protecting-ltp-tile-colour-intensifier-11264 This is exactly what would need to be used in future, to create the desired look. Kind Regards, Walls and Floors.

23/02/21Karlie |Verified purchase

Smells a bit, so defo need to use in a well ventilated room. It really didn’t change the look of our tiles when it was dried. I was sceptical, but it was fab!

05/01/21Di |Verified purchase

My friendly tiler has said to give all the terracotta tiles three coats of sealer on all sides (front, back and edges), so I had not ordered enough.(it says differently on the Walls and Floor web site web site) It definitely needs to be applied in a well ventilated area. But hopefully does the trick in the long run, have managed to do almost thirty tiles with my two litres...just 48 more to go!!...when more sealant turns up.

06/12/20Robert Hooper|Verified purchase

Really brought out the depth and contours when applied to the natural slate tiles I purchased. Really looking forward to grouting them now they are sealed.

Read More Reviews:

Q & A

Claire19/01/25

Looking tho reseal slate flooring that has been down for many years. Do you need to avoid getting this product on the groutOur Advice

Hi Claire, You can apply the LTP Mattstone Tile Sealer at any point to your tiles, and it will not affect the grout. Kind Regards, Walls and Floors.

Dave08/09/22

Would it be safe to seal tiles by a wood burner with this?Our Advice

Hello Dave, The short answer is yes this can be used by a wood burner, we would recommend that once this has been applied to your tiles, wait for it to completely dry before using the wood burner,

Alistair Clarke25/01/19

Can travertine tiles be used in a conventional shower room (not wet room?) Other suppliers I have talked to say it is possible but not advisable. But your advertising photo specifically shows the tiles in a shower application.Our Advice

Hi Alistair, Travertine tiles are fine for use within correctly prepared wet areas. As with any tiling project, it is essential that walls are of suitable construction, to hold the weight of the tiles. Plaster or plaster skim can only hold a maximum of 20kg per sqm, whereas bare unskimmed plasterboard (32kgs) or a backer board such as HardieBacker (over 100kgs) would be more suitable. https://www.wallsandfloors.co.uk/hardiebacker-board-james-hardie The substrate also needs to be made waterproof by using a suitable tanking system, such as the Ardex WPC: https://www.wallsandfloors.co.uk/ardex-tile-preparation-sealants-ardex-wpc-waterproof-protection-coat The tiles need fixing with a White flexible adhesive (Stand-Flex) and also require sealing both before and after grouting, with either the LTP Mattstone or the LTP Colour Intensifier: https://www.wallsandfloors.co.uk/toolshed-tile-adhesive-standard-flex-white-tile-adhesive https://www.wallsandfloors.co.uk/ltp-cleaning-protecting-ltp-mattstone-tile-sealer-11256 https://www.wallsandfloors.co.uk/ltp-cleaning-protecting-ltp-tile-colour-intensifier-11264 If you wish to discuss your project in more detail, please call our sales team on 01536 314730, and they will be more than happy to help you. Regards Walls And Floors

brian leonard09/10/18

should quarry tiles be grouted before the sealer is put on ?Our Advice

Hi Brian, For any tile that requires sealing, it is recommended to give them a coat before grouting (to aid grout removal and prevent potential staining) and after grouting (to ensure the tile is sealed and to also seal the grout). The porosity of most quarry tiles is usually quite low, so only very thin applications with a microfibre cloth will be required for full protection. Regards Walls And Floors

Andrew Daniels03/04/18

how big an area will 1 litre cover ?Our Advice

Hi Andrew, The coverage will depend on the tile porosity and how many coats will be required. As a rule, 1 litre will average 10 sqm per coat, sometimes more depending on how porous the tile is and how much will sink in. As a general guide, quarry tiles will only need on coat - marble, travertine, limestone, slate 2-3 coats - handmade terracotta up to 5 coats. However there is an element of trial and error as you continue to apply the sealer until the tile will not allow any more. I hope this helps but if you wish to discuss your project in more detail, please contact our sales team on 01536 314730 and they will be more than happy to assist you. Regards, Walls And Floors