The Trepanel® Texture Denim Blue Herringbone Acoustic Wood Wall Panel combines decorative design with acoustic performance. Made from wood and backed with acoustic felt, it helps reduce sound while bringing a striking denim blue herringbone finish to internal walls. With its matt surface and large panel size, it delivers both visual impact and practical coverage.

Following the Trepanel® Guide. It can be installed by one person (although you may prefer a team of two for fixing!), it’s fast to put up and creates minimal mess, so you can transform a space in minutes!

We recommend regular cleaning with a duster or soft brush to gently remove dust and debris, and avoid harsh brushes and scratchy materials.
Do NOT use any type of wood or furniture polish, as it can damage the veneer. Our panels are fully finished, so no need for additional maintenance or oiling.
Periodic use of vacuums with a soft attachment can easily remove dust from the felt back.
For more stubborn stains, use a damp cloth (not wet). If spills occur, use a clean, absorbent cloth to dry immediately.
Avoid excess moisture with Trepanel® as the felt back should not come into contact with liquids.

To fix Trepanel® we recommend using either black matt coated 38mm screws or Mapei Super Grip Panel Adhesive. One panel requires 15 screws or one tube of adhesive.

We recommend cutting these panels with a circular saw. Please cut the panels from the front, and never from the side, as this will cause pulling and damage across the fabric veneer. For added protection, add masking tape to the area you wish to cut, to prevent the fabric edge from chipping and burrs.

Please note: We do not recommend use in areas close to a heat source, e.g. a hob or fireplace, or where they will come into direct contact with water.